|
Product Details:
|
| Material: | Mold Steel,mold Bases | Usage: | PLASTIC MOLD |
|---|---|---|---|
| STANDARD MOLD BASES: | ALL MODEL | Model: | 718 718H P20 P20H P40 H13 S136 738 CR8 CR12 CR12MOV 4CR13 4CR13H NAK80 DC53 H13 |
| Standard:: | DIN, JIS, AISI, ASTM, GB | Technics:: | Hot Rolled/Hot Forged |
| Application:: | Tool Steel Bar | Special Use: | High-strength Steel Plate, Wear Resistant Steel, Cold Heading Steel, Free Cutting Steel, Mold Steel |
| Special Service: | CNC And Other Machines Customized As Your Design Drawings | ||
| High Light: | CR12MOV Standard Mould Base,P20 Standard Mould Base,P20 abrasion resistant metals |
||
一,Supply model:718 718H P20 P20H P40 H13 S136 738 CR8 CR12 CR12MOV 4CR13 4CR13H NAK80 DC53 H13 440C S50C S45C S55C SKD11 SKD61
二,Standard base.
三,Customized to your needs.we have a lot of machines( including CNC )to make what you need.
四,Technical parameters
| S45C(ASTM :1045,080M46,DIN:C45) |
|---|
|
C:0.42~0.50%,Si:0.17~0.37%,Mn:0.50~0.80%,Cr≤0.25%,Ni≤0.30%., Cu≤0.25%. |
|
Density7.85g/cm3,Elastic modulus:210GPa,Poisson's ratio:0.31.HRC:55 |
| P20 | |
|---|---|
|
C:0.28-0.40；Si:0.20-0.80；Mn:0.60-1.00；Cr:1.40-2.00；Mo:0.30-0.55；P:≤0.030；s:≤0.030 |
|
| HRC:30-36 | |
|
| 718 |
| C:0.28~0.40,Si:0.20~0.80,Mn:0.60~1.00,Cr:1.40~2.00,Ni:0.80~1.20, Mo:0.30~0.55. |
| Factory status :HB290-330 |
| 2738 |
|
C : 0.35-0.46 Si : 0.2-0.4 Mn:1.3-1.6 P : ≦0.035 S :≦0.005 Cr1:.8-2.2 Mo : 0.15-0.25 Ni :0.9-1.2 |
| HRC29-33 |
| H13 |
|
C:0.35 Si:0.91 Mn:0.1-0.4 Cr:5.00 Mo:1.50 W:1.50 V:0.40 |
| HRC55 |
| S136 |
| C:0.38,Si:0.8,Mn:0.5,Cr:13.6,P<0.03,S<0.03 |
| HB250 |
| SKD-11 |
|
C:1.4~1.6,Si:≤0.40,Mn: ≤0.60,P:≤0.030,S:≤0.030,Cr:11.0-13.0,Mo:0.80-1.20,Ni:≤0.50,V: 0.20-0.50,Cu:≤0.25 |
| HRC58-60 After heat-treat HRC:65 |
| SKH-51 |
|
C:0.85,Si:0.30,Mn:0.30,Cr:4.00,W:6.30,V:1.80,Mo:5.00 |
|
HRC63 |
| DC-53 |
| Si:0.91,Mn:0.32,Cr:8.00,Mo:2.00,V:0.28,P:0.0007 |
| HRC63 |
Contact Person: admin
Tel: +8613285847507
